The key words of this station:Seedbed net

Contact Us

Seedbed net

Hebei Tong Pu metal wire mesh Manufacturing Co., Ltd.

Contact: +86 13653286661 (Manager Li)


Factory address:Hebei Chengdong Development Zone

Tidal seedbed

Tidal irrigated moving bed

  • Release date:2018-06-18 Total browsing:
Tidal irrigated moving bed图片1 Tidal irrigated moving bed图片2 Tidal irrigated moving bed图片3 Tidal irrigated moving bed图片4

1. selection of the size of the seedbed

At present, the size of the international tidal bed box is 4550mm*1690mm (long * width), which is the 4.55 meter *1.7 meter bed which we often say. Therefore, the length of a single seedbed should be a multiple of 4.55 meters in the design of the seedbed, and the width should be a multiple of 1.7 meters, which can make the seedbed with the highest rate of use and no waste area. According to the plane map above the plan The design of the seedbed is two specifications of 1.7m*18m and 1.7m*22.5m.

2. seedbed configuration

The greenhouse has 37 seedbeds of 1.7m*18.2m, 31 seedbeds of 1.7m*22.75m, and the seedbed area is: flat rice. The number of beds that can be placed in tidal beds is 303. The number of points that can be placed is 14544.

3. characteristics of tidal bed

The material of the main structure is made of aluminum alloy frame.Holistic hot-dip galvanizing process for skeleton

It can move long distance between left and right, and fine adjustment can be made in height direction, which is conducive to tidal irrigation and accurate control of water level.

It has anti - overturn device to prevent the tilt due to the weight.

It is possible to produce about 0.6 meters of operation passageway between any two seedbeds.

The maximum load bearing load 40kg/ for the design of the seedbed

This type of bed is specially designed for the tidal irrigation system

Tidal irrigation system

1. tidal irrigation system

The tidal irrigation system (Ebb-and-flowsystem), which originated from the developed Holland, is an irrigation method designed for the nutrient solution cultivation and container breeding of potted plants. This method uses the principle of drop difference to realize regular water supply and fertilization. 

Tidal irrigation is especially suitable for cultivation and container seedling cultivation of potted flowers.

2. system composition of tidal irrigation

The tidal irrigation system is composed of 4 major parts: tidal irrigation bed, nutrient liquid circulation system (including

nutrient pool, circulating water pump, pipeline, etc.), control system and cultivation container (planting basket).

3. working principle of tidal irrigation

The cultivation container (planting basket) with a reticulate pelvic floor is placed on the tidal irrigation bed, and the nutrient solution is pumped out from the nutrient pool with a special circulating water pump to the cultivation bed, and the depth of the cultivated bed is submerged about 20-30mm. After about 10-15min, the nutrient solution rises to the surface of the substrate in the cultivation container because of the capillary action, and then the nutrient solution is discharged to make it again The nutrient solution can also be extracted when other cultivation beds need water. Tidal irrigation and nutrient film irrigation (NFT) also have the equipment to adjust the pH value of nutrient solution and various nutrient concentrations. However, it is easy to increase the filtration system in order to avoid excessive contamination of nutrient solution due to the falling of foreign matter such as branches and leaves and substrates.

Label: Tidal irrigated moving bed厂家Tidal irrigated moving bed价格Tidal bed panel

The last one:Tidal bed panel   Next:Tidal seedbed irrigation
友情链接:    豫彩通彩票app      一袋金彩票  pk10回血上岸经验   558赢彩-首页